Crankshaft

SERVICE SPECIFICATIONS
Thrust Clearance:
Standard 0.020 - 0.220 mm (0.0008 - 0.0087 inch)
Maximum 0.30 mm (0.0118 inch)
Main Journal Bore Diameter On Cylinder Block:
With Main Bearing 66.986 - 67.000 mm (2.6372 - 2.6378 inch)
Main Journal Oil Clearance:
Standard 0.040 - 0.058 mm (0.0016 - 0.0023 inch)
Maximum 0.070 mm (0.0028 inch)
Main Journal Diameter 66.988 - 67.000 mm (2.6373 - 2.6378 inch)
Crank Pin:
Diameter 51.982 - 52.000 mm (2.0465 - 2.0472 inch)
Circle Runout:
Maximum 0.08 mm (0.0031 inch)
Main Journal Taper and Out-Of-Round:
Maximum 0.02 mm (0.0008 inch)
Crank Pin Taper and Out-Of-Round:
Maximum 0.02 mm (0.0008 inch)