Ride Height Sensor: Service and Repair

REMOVAL

1. Remove front height control sensor.
a. Remove the front wheel.
Torque: 131 Nm (97 ft. lbs.)
b. Disconnect the connector.





c. Remove the front height control sensor.
1. Place matchmarks on the height control sensor link and front upper suspension arm.
2. Remove the nut and disconnect the height control sensor link.
Torque: 5.6 Nm (49 inch lbs.)
3. Remove the 2 bolts and height control sensor.
Torque: 28 Nm (21 ft. lbs.)
2. Remove rear height control sensor.
a. Remove the rear wheel.
Torque: 131 Nm (97 ft. lbs.)
b. Disconnect the connector.





c. Remove the rear height control sensor.
1. Place matchmarks on the height control sensor link and rear upper control arm.
2. Remove the nut and disconnect the height control sensor link from the rear upper control arm.
Torque: 5.6 Nm (49 inch lbs)
3. Remove the 2 bolts and height control sensor.
Torque: 28 Nm (285 kgs.cm, 21 ft. lbs.)



INSTALLATION

Installation is in the reverse order of removal.