Fuse Block: Testing and Inspection

INSPECT ENGINE ROOM JUNCTION BLOCK CIRCUIT







a. Remove the fuse from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.







b. Remove the relay from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.










INSPECT DRIVER SIDE JUNCTION BLOCK FUSE CIRCUIT
Remove the fuse from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.










INSPECT DRIVER SIDE JUNCTION BLOCK RELAY CIRCUIT
Remove the relay from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.







INSPECT PASSENGER SIDE JUNCTION BLOCK CIRCUIT
Remove the relay from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.