Starter Relay: Testing and Inspection

REMOVE STARTER RELAY (Marking: "ST")
Remove the relay box cover and starter relay.




INSPECT RELAY CONTINUITY
a. Using an ohmmeter, check that there is continuity between terminals 3 and 4.
If there is no continuity, replace the relay.
b. Check that there is no continuity between terminals 1 and 2.
If there is continuity, replace the relay.




INSPECT RELAY OPERATION
a. Apply battery voltage across terminals 3 and 4.
b. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.

REINSTALL STARTER RELAY