Troubleshooting

1. Driver's door does not operate.

2. Passenger's and all rear doors do not operate by using the switches of each seat.

3. Any passenger's and all rear doors does not operate by using the switches of each seat.

4. Passenger's and all rear doors are not controlled by using the maser switch. (Switches at each door can be operated.)

5. AUTO UP and DOWN do not operate. (Prepare a normal master switch.)

6. DOWN operate during door glass AUTO UP operation.

7. Even through a foreign object is caught, DOWN operation does not function.

8. After ignition switch has been turned OFF by using a key, power window function does not operate.

*1 Resetting method of the motor for jam protection.

HINT:
^ When cutting the motor away from the regulator or racing the motor, make sure to rest the motor.
^ This is the operation to set limit switch at "OFF".
1. Connect the motor to the vehicle side harness.
2. Rotate the motor to the rising direction for 4 - 5 secs.

HINT: Rotating the motor for 4 - 5 secs. sets the limit switch at "OFF". (Top dead center of the door glass.)

*2 Resetting method of the motor for jam protection.
1. Move the window to the fully closed position. (perform this by manual operation.)
2. Using the bar with 2 mm dia, press the reset switch.
3. With the reset switch pressed, move the window to the fully opened position with the master switch. (Perform this by manual operation)
4. Remove the bar from the reset switch, move the window to the fully closed position