Front Seat
REMOVAL1. REMOVE SEAT TRACK COVERS
Using a screwdriver, remove the seat track covers.
HINT: Tape the screwdriver tip before use.
2. REMOVE FRONT SEAT
a. Remove the 4 bolts.
b. Disconnect the connectors.
c. Remove the front seat.
NOTE: Be careful not to damage the body.
INSTALLATION
1. INSTALL FRONT SEAT
a. Mount the front seat to the vehicle.
b. Connect the connectors.
c. Slide the front seat to the rear most position.
d. Tighten the bolts on the front side temporarily, from the bolt on the outer side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
e. Slide the front seat to the front most position.
f. Tighten the bolts on the rear side temporarily, from the bolt on the outer side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
2. INSTALL SEAT TRACK COVERS