Dash Board Disassembly and Reassembly

DISASSEMBLY
1. REMOVE GLOVE BOX LIGHT ASSEMBLY





2. REMOVE CENTER BRACKET SUB-ASSEMBLY
Remove the 3 screws and center bracket sub-assembly.

3. REMOVE NO.1 AND NO.2 SIDE DEFROSTER NOZZLES
Using a screwdriver, remove the side defroster nozzles.

HINT: Tape the screwdriver tip before use.




4. REMOVE DEFROSTER NOZZLE GARNISH
Using a screwdriver, remove the defroster nozzle garnish.

HINT: Tape the screwdriver tip before use.

5. REMOVE DEFROSTER NOZZLE ASSEMBLY
Remove the 5 screws and defroster nozzle assembly.

6. REMOVE NO.5 SIDE DEFROSTER NOZZLE DUCT
Remove the 2 screws and No.5 side defroster nozzle duct.

7. REMOVE NO.1 SIDE DEFROSTER NOZZLE DUCT
Remove the screw and No.1 side defroster nozzle duct.

8. REMOVE NO.2 SIDE DEFROSTER NOZZLE DUCT
Remove screw and No.2 side defroster nozzle duct.

9. REMOVE HEATER TO RESISTER NO.1 DUCT
Remove the 2 screws and heater to register No.1 duct.

10. REMOVE HEATER TO RESISTER NO.4 DUCT
Remove the 2 screws and heater to register No.4 duct.

11. REMOVE NO.1 REGISTER
Remove the 2 screws and No.1 register.

12. REMOVE NO.4 REGISTER
Remove the 2 screws and No.4 register.

13. REMOVE HEATER TO REGISTER CENTER SUB DUCT
Remove the 4 screws and heater to register center sub duct.




14. REMOVE WIRE HARNESS
a. Remove the 5 screws.
b. Disengage the clamps and remove the wire harness.

15. REMOVE NO.1 MOUNTING BRACKET
Remove the 2 screws and No.1 mounting bracket.

16. REMOVE AUTOMATIC LIGHT CONTROL SENSOR
17. REMOVE SOLAR SENSOR

REASSEMBLY
Reassembly is in the reverse order of disassembly.