Installation

1. INSTALL FRONT AIRBAG SENSOR
a. Install the front airbag sensor with the arrow on the sensor facing toward the front of the vehicle.

Torque: 20 Nm (205 kgf.cm, 15 ft.lbf)

NOTE:
- Make sure the sensor is installed with the specified torque.
- If the sensor has been dropped, or there are cracks, dents or other defects in the case, brackets or connector, replace the removed sensor, with new ones.
- The front sensor is equipped with an electrical connection check mechanism. Be sure to lock this mechanism securely when connecting the connector. If the connector is not securely locked, a malfunction code will be detected by the diagnostic system.

b. Connect the front airbag sensor connector.

2. INSTALL REMOVED PARTS