Removal

NOTE: Do not open the cover or the case of the ECU and various
electrical devices unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by
static electricity.)

1. REMOVE CENTER PILLAR LOWER GARNISH
a. Remove the front door scuff plate.
b. Remove the rear door scuff plate.
c. Remove the center pillar lower garnish.






2. REMOVE FRONT SEAT OUTER BELT RETRACTOR
a. Disconnect the pretensioner connector.
b. Disconnect the retractor switch connector.
c. Remove the 2 bolts and retractor.






3. REMOVE SIDE AIRBAG SENSOR ASSEMBLY

a. Disconnect the connector.

NOTE: Remove the connector with the sensor assembly installed.

b. Using a torx wrench, remove the 3 screws and side airbag sensor assembly.
Torx wrench: T40 (Part No.09042-00020 or locally manufactured tool)