Alignment
| Vehicle Height | Front Measure Points: A: Ground clearance of spindle center. B: Ground clearance of lower suspension arm front bolt center. | A-B | 3.256 Inch (in) |
| Rear Measure Points: C: Ground clearance of rear axle shaft center. D: Ground clearance of lower control arm front bolt center. | C-D | 2.803 Inch (in) | |
| Camber | STD | 0.0 +/- 0.75 Degrees (deg) | |
| Left-Right Error | Maximum | 0.5 Degrees (deg) | |
| Caster | STD | 3.08 +/- 0.5 Degrees (deg) | |
| Left-Right Error | Maximum | 0.5 Degrees (deg) | |
| Steering Axis Inclination | STD | 12.25 +/- 0.5 Degrees (deg) | |
| Left-Right Error | Maximum | 0.5 Degrees (deg) | |
| Toe | Total | 0.0 +/- 0.08 Inch (in) | |
| Tie Rod End Length Difference | Maximum | 0.118 Inch (in) | |
| Wheel Angle (Maximum) | Inside Wheel | 33.7 - 36.7 Degrees (deg) | |
| Outside Wheel (reference) | 32.6 Degrees (deg) |