Replacement Requirement
REPLACEMENTREPLACE TRANSMITTER (LITHIUM) BATTERY
NOTE: Special caution should be taken for handling each component as they are precision electronic components.
a. Using a screwdriver, remove the screw and the cover.
NOTE: Do not pry out the cover forcibly.
HINT: Push the cover with a finger as shown in the illustration, to make a gap space, and then pry out the cover from the gap space.
b. Remove the transmitter.
c. Using a screwdriver, remove the 2 screws and the cover.
d. Remove the battery (lithium battery).
NOTE:
- Do not push the terminals with a finger.
- If prying up the battery (lithium battery) forcibly to remove, the terminals are deformed.
e. Install a battery (lithium battery) as shown in the illustration.
NOTE: Face the battery upward. Take care not to deform the terminals.
f. Check that O-ring is not distorted or slipped off, and install the cover.
g. Using a screwdriver, tighten the 2 screws.
NOTE: When the shrews are tightened loosely, it might cause faulty contact of the battery (lithium battery) and terminals.
h. Assemble the transmitter to the key plate and the cover.
i. Using a screwdriver, tighten the screw.