Overhaul

DISASSEMBLY

1. REMOVE REAR DRIP CHANNEL




a. Using a screwdriver, remove the front side of rear drip channel.




b. Remove the rear drip channel as shown in the illustration.

2. REMOVE SLIDING ROOF PANEL STOPPER
Remove the 2 screws and 2 stoppers.

3. REMOVE SUNSHADE TRIM
4. REMOVE DRIVE CABLE




a. Remove the screw and guide rail stopper.
b. Slide the drive cable rearward, then remove it.






HINT:
- At the time of assembly, please refer to the following items.
- Adjust the drive cable to a closed and tilted down position.
- Slide the cable forward or backward to align the 2 marks as shown.
- Slide the cable to the forefront with your hand.




5. REMOVE WIND DEFLECTOR PANEL
Remove the 2 screws and wind deflector as shown in the illustration.




6. REMOVE GUIDE BLOCK
Remove the 2 screws and guide block.




7. REMOVE SLIDING ROOF HOUSING
Remove the 6 screws and sliding roof housing.

8. REMOVE CABLE GUIDE CASING

REASSEMBLY
Reassembly is in the reverse order of disassembly.