Crankshaft, Engine

Crankshaft
Thrust clearances
STD 0.020 - 0.220 mm (0.0008 - 0.0087 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust washer thickness 2.440 - 2.490 mm (0.0961 - 0.0980 inch)
Main journal bore diameter on cylinder block (with main bearing) 66.986 - 67.000 mm (2.6372 - 2.6378 inch)
Main journal oil clearance
STD 0.040 - 0.058 mm (0.0016 - 0.0023 inch)
Maximum 0.070 mm (0.0028 inch)
Main journal diameter 66.988 - 67.000 mm (2.6373 - 2.6378 inch)
Crank pin diameter 51.982 - 52.000 mm (2.0465 - 2.0472 inch)
Circle runout
Maximum 0.08 mm (0.0031 inch)
Main journal taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crank pin taper and out-of-round
Maximum 0.02 mm (0.0008 inch)