Height Control Operation Test (Active Test)

HEIGHT CONTROL OPERATION TEST (ACTIVE TEST)




a. Using SST, connect terminals Ts and E1 of DLC1.
SST 09843-18020

b. Push the "DOWN" button of the height select switch 5 times or more within 5 seconds after starting the engine.

HINT: At this time the height control OFF indicator light flashes at 0.25 second intervals.







c. By operating each switch in the following table, check the operation of the height control of each wheel.

NOTE: Do not raise the vehicle height higher than the "HI" position when raising it with the active test.