Removal and Installation

Part 1 Of 2:

Part 2 Of 2:

REMOVAL
1. REMOVE TRANSFER SHIFT LEVER KNOB
2. REMOVE UPPER CONSOLE PANEL





3. SEPARATE NO. 1 FLOOR SHIFT GEAR SHIFTING ROD
a. Shift into the N position.
b. Remove the nut and separate the No. 1 floor shift gear shifting rod from the connecting rod swivel.





4. REMOVE FLOOR SHIFT LEVER ASSEMBLY
a. Disconnect the connector.
b. Remove the 6 bolts.
Torque: 8.3 Nm (85 kgf-cm, 73 inch lbs.)
c. Remove the floor shift lever assembly.

INSTALLATION





1. INSTALL FLOOR SHIFT LEVER ASSEMBLY
a. Install the floor shift lever assembly with the 6 bolts.
Torque: 8.3 Nm (85 kgf-cm, 73 inch lbs.)
b. Connect the connector to the floor shift lever assembly.





2. INSTALL No.1 FLOOR SHIFT GEAR SHIFTING ROD
a. Shift into the N position.
b. Connect the No.1 floor shift gear shifting rod and the connecting rod swivel with the nut.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
3. INSTALL UPPER CONSOLE PANEL
4. INSTALL TRANSFER SHIFT LEVER KNOB