Windows: Description and Operation

System Outline

- The power window system is controlled by the body ECU and each door ECUs (Power Window control switches).
- This system has following features.

1. Manual Up and Down Function
This function causes the window to open or close while the power window switch is being pulled halfway up or pushed halfway down. The window stops as soon as the switch is released.

2. All Door One-Touch Auto Up and Down Function
The all door one-touch auto up and down function enables the window of all door to be fully opened or closed at a touch of the power window switch.

3. Jam Protection Function
A jam protection function automatically stops the power window and moves it downward if a foreign object gets jammed in the window during one-touch auto-up operation.

4. Remote Control Function
The up and down operations of the front passenger door window and the rear door windows can be controlled by operating the power window master switch.

5. Key-Off Operation Function
The driver's door key-off operation function makes it possible to operate the power window for approximately 43 seconds after the ignition switch is turned to the ACC or LOCK position, if the front doors are not opened.

6. Key-Linked Up and Down Function
A key-linked up and down function, which is linked to the driver door key cylinder operation, open or close the window of the all doors.

7. Transmitter-Linked Up and Down Function
When the body ECU receives an unlock signal from the transmitter continuously for longer than 2.5 seconds, the door ECU control their power window motors in accordance with the signal to open or close the windows