Quarter Window Glass: Service and Repair

REMOVAL




1. REMOVE ROOF HEADLINING REAR TRIM
Using a screwdriver, remove the roof headlining rear trim.

HINT: Tape up the screwdriver tip before use.

2. REMOVE REAR NO. 2 SEATS
3. REMOVE REAR MAT SET PLATE




a. Remove the 5 screws.
b. Using a screwdriver, remove the rear mat set plate.

HINT: Tape up the screwdriver tip before use.




4. REMOVE NO. 3 REAR SEAT PROTECTOR
Remove the 4 screws and the No. 3 rear seat protectors.

5. REMOVE NO. 3 SEAT FRONT BRACKET COVER
Remove the 2 screws and the No. 3 seat front bracket covers.

6. REMOVE NO. 3 SEAT BRACKET SUPPORT COVERS
7. REMOVE REAR FLOOR CARPET
8. REMOVE REAR NO. 2 SEAT OUTER BELT FLOOR ANCHOR

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)

9. REMOVE REAR NO. 1 SEAT OUTER BELT FLOOR ANCHOR

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)

10. REMOVE REAR DOOR SCUFF PLATES
11. REMOVE REAR DOOR OPENING TRIMS
12. REMOVE QUARTER TRIM PANEL




a. Remove the quarter trim jack cover.
b. Using a clip remover, remove the 2 clips.
c. Remove the quarter trim panel, then disconnect the connector.

13. REMOVE REAR NO. 2 SEAT OUTER BELT SHOULDER ANCHOR
14. REMOVE REAR NO. 1 SEAT OUTER BELT SHOULDER ANCHOR
15. REMOVE UPPER ROOF SIDE INNER GARNISH




a. Using a screwdriver, remove the 2 assist grip plugs, then remove the 2 screws and the assist grip.

HINT: Tape up the screwdriver tip before use.

b. Using a clip remover, remove the clip.
c. Using a screwdriver, remove the upper roof side inner garnish.

HINT: Tape up the screwdriver tip before use.

16. REMOVE QUARTER WINDOW GLASS




a. Disconnect the connector.
b. Remove the 2 bolts, the 2 nuts and the quarter window glass.

17. REMOVE QUARTER WINDOW GLASS WEATHERSTRIP
18. REMOVE QUARTER BELT MOULDING




a. Remove the screw.
b. Using a screwdriver, remove the quarter belt moulding.

HINT: Tape up the screwdriver tip before use.




19. REMOVE REAR VENT WINDOW MOTOR
Remove the screw and the rear vent window motor.

20. REMOVE QUARTER WINDOW LOCK
Remove the screw and the quarter window lock.

INSTALLATION
Installation is in the reverse order of removal.