Antenna: Testing and Inspection

INSPECTION




1. INSPECT ANTENNA MOTOR
a. Connect the positive (+) lead from the battery to terminal 2, 3, 4 and 5 and the negative (-) lead to terminal 6.
b. Check that the motor turns (moves upward).

NOTE: These tests must be done quickly (within 3-5 seconds) to prevent the coil from burning out.




c. Disconnect the positive (+) lead from the battery from the terminal 4.

NOTE: These tests must be done quickly (within 3-5 seconds) to prevent the coil from burning out.







2. INSPECT ANTENNA MOTOR CONTROL RELAY CIRCUIT
Disconnect the connector from the relay and inspect the connector on wire harness side, as shown in the chart.