Overhaul

DISASSEMBLY




1. REMOVE GLOVE BOX LIGHT ASSEMBLY
2. REMOVE CENTER BRACKET SUB-ASSEMBLY
Remove the 3 screws and center bracket sub-assembly.

3. REMOVE NO. 1 AND NO. 2 SIDE DEFROSTER NOZZLES
Using a screwdriver, remove the side defroster nozzles.

HINT: Tape the screwdriver tip before use.




4. REMOVE DEFROSTER NOZZLE GARNISH
Using a screwdriver, remove the defroster nozzle garnish.

HINT: Tape the screwdriver tip before use.

5. REMOVE DEFROSTER NOZZLE ASSEMBLY
Remove the 5 screws and defroster nozzle assembly.

6. REMOVE NO. 5 SIDE DEFROSTER NOZZLE DUCT
Remove the 2 screws and No. 5 side defroster nozzle duct.

7. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
Remove the screw and No. 1 side defroster nozzle duct.

8. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
Remove the screw and No. 2 side defroster nozzle duct.

9. REMOVE HEATER TO RESISTER NO. 1 DUCT
Remove the 2 screws and heater to register No. 1 duct.

10. REMOVE HEATER TO RESISTER NO. 4 DUCT
Remove the 2 screws and heater to register No. 4 duct.

11. REMOVE NO. 1 REGISTER
Remove the 2 screws and No. 1 register.

12. REMOVE NO. 4 REGISTER
Remove the 2 screws and No. 4 register.

13. REMOVE HEATER TO REGISTER CENTER SUB DUCT
Remove the 4 screws and heater to register center sub duct.

14. REMOVE WIRE HARNESS




a. Remove the 5 screws.
b. Disengage the clamps and remove the wire harness.

15. REMOVE NO. 1 MOUNTING BRACKET
Remove the 2 screws and No. 1 mounting bracket.

16. REMOVE AUTOMATIC LIGHT CONTROL SENSOR
17. REMOVE SOLAR SENSOR

REASSEMBLY
Reassembly is in the reverse order of disassembly