C1241

DTC C1241 LOW BATTERY POSITIVE VOLTAGE OR ABNORMALLY HIGH BATTERY POSITIVE VOLTAGE

CIRCUIT DESCRIPTION

DTC Detection Condition:

If the voltage supplied to the IG1 terminal is not within the DTC detection threshold due to malfunctions in such as the battery and alternator circuit, this DTC is stored.

Wiring Diagram:

Step 1 - 2:

Step 3 - 4:

Step 5 - 6:

INSPECTION PROCEDURE

NOTE: When replacing the master cylinder solenoid, perform zero point calibration.

HINT: After steps 1 and 2 are completed, start the inspection from step 3 when using the hand-held tester and start from step 4 when not using the hand-held tester.