ABS (Antilock Brake System)
DIAGNOSTIC TROUBLE CODE CHARTHINT:
- If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, turn to the respective DTC No. in the DTC chart.
- Inspect the fuse and relay before investigating the trouble areas as shown in the table.
C0200/31 - C1227/27:
C1228/28 - C1254/54:
C1256/56 - U0124/95:
DTC chart of ABS
(*1), (*2):
Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed.
- (*1):
1. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
2. Clear the DTC.
- (*2):
1. Keep the vehicle in a stationary condition for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
2. Repeat the above operations 3 times or more and check that the ABS warning light goes off.
3. Clear the DTC.
HINT:
- In some cases, the hand-held tester cannot be used when the ABS warning light remains on.
- When U0073/94, U0100/65, U0123/62, U0124/95 or U0126/63 is output, inspect and repair the trouble areas indicated by these codes first.
(*3): The skid control buzzer sounds.
C1201/51 - C1203/53:
C1210/36 - U0126/63:
DTC chart of VSC
HINT: In some cases, the hand-held tester cannot be used when the VSC TRAC warning light remains on.
C1271/71 - C1283/83:
C0371/71 - C1379/74:
DTC OF SIGNAL CHECK FUNCTION