Display Signal Circuit (From Multi-Display Controller Sub-Assy)
DISPLAY SIGNAL CIRCUIT (FROM MULTI DISPLAY CONTROLLER SUB ASSY)CIRCUIT DESCRIPTION
This is the DVD display signal circuit from the multi display controller sub assy to the multi display.
Wiring Diagram:
Step 1:
Step 2:
INSPECTION PROCEDURE
HINT: The waveform pattern may differ from that shown in the illustration due to differences in oscilloscope settings. A normal multi display controller sub assy operating condition can be determined if any waveform is output.
Oscilloscope wave Terminal:NTSC Body ground
Setting: 500 mV/DIV 10 Micro Seconds/DIV
Condition: DVD display is on.