System Inspection
INSPECTION1. INSPECT FRONT DOOR W/MOTOR LOCK ASSEMBLY LH
a. Apply battery voltage and inspect operation of the door lock motor.
Standard:
If operation is not as specified, replace the door lock assembly.
b. Inspect the position switch continuity.
Standard:
If the continuity is not as specified, replace the door lock assembly.
c. Inspect the door lock and unlock switch continuity.
Standard:
If the continuity is not as specified, replace the door lock assembly.
2. INSPECT FRONT DOOR W/MOTOR LOCK ASSEMBLY RH
a. Apply battery voltage and inspect operation of the door lock motor.
Standard:
If operation is not as specified,replace the door lock assembly.
b. Inspect the position switch continuity
Standard:
If operation is not as specified,replace the door lock assembly.
3. INSPECT REAR DOOR W/MOTOR LOCK ASSEMBLY LH
a. Apply battery voltage and inspect operation of the door lock motor.
Standard:
If operation is not as specified,replace the door lock assembly.
b. Inspect the position switch continuity.
Standard:
If operation is not as specified,replace the door lock assembly.
4. INSPECT REAR DOOR W/MOTOR LOCK ASSEMBLY RH
a. Apply battery voltage and inspect operation of the door lock motor.
Standard:
If operation is not as specified,replace the door lock assembly.
b. Inspect the position switch continuity.
Standard:
If operation is not as specified,replace the door lock assembly.
5. INSPECT W/MOTOR BACK DOOR LOCK ASSEMBLY
a. Apply battery voltage and inspect operation of the door lock motor.
Standard:
If operation is not as specified,replace the door lock assembly.
b. Inspect the position switch continuity.
Standard:
If operation is not as specified,replace the door lock assembly.
6. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a. Inspect the door control switch.
7. INSPECT DOOR CONTROL SWITCH ASSEMBLY (PASSENGER SIDE)
Standard:
If the continuity is not as specified, replace the switch assembly
a. Apply battery voltage and inspect operation of the switch illumination.
Standard:
If operation is not as specified, replace the switch assembly.