Inspection

INSPECTION







1. INSPECT SEAT MEMORY SWITCH (W/ MEMORY)
a. Inspect the switch continuity.
If the result is not as specified, replace the switch assembly.







2. INSPECT FRONT POWER SEAT SWITCH LH (W/o MEMORY)
a. Inspect the continuity between the terminals when each switch is operated.
If the result is not as specified, replace the front power seat switch.







3. INSPECT FRONT POWER SEAT SWITCH RH
a. Inspect the continuity between the terminals when each switch is operated.
If the result is not as specified, replace the front power seat switch.







4. INSPECT POWER SEAT SWITCH ASSEMBLY (LUMBAR SUPPORT)
a. Inspect the continuity between the terminals when the switch is operated.
If the result is not as specified, replace the power seat switch assembly.







5. INSPECT FRONT SEAT ADJUSTER ASSEMBLY
a. Inspect operation of the slide motor.
1. Check that the motor rotates smoothly when the battery is connected to the slide motor connector terminals.
If the result is not as specified, replace the slide motor.







b. LH side:
Inspect operation of the front vertical motor.
1. Check that the motor rotates smoothly when the battery is connected to the front vertical motor connector terminals.
If the result is not as specified, replace the front vertical motor.







c. LH side:
Inspect operation of the lifter motor.
1. Check that the motor rotates smoothly when the battery is connected to the lifter motor connector terminals.
If the result is not as specified, replace the lifter motor.







d. Inspect operation of the reclining motor.
1. Check that the motor rotates smoothly when the battery is connected to the reclining motor connector terminals.
If the result is not as specified, replace the reclining motor.







6. LH side:
INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY
a. Inspect operation of the motor.
If the result is not as specified, replace the lumbar support adjuster motor.