Tilt Wheel Switch: Service and Repair
TILT & TELESCOPIC MANUAL SWITCHREPLACEMENT
HINT: Observe Restraint Systems Service Precautions.
1. REMOVE COVER, STEERING COLUMN, LWR
2. REMOVE STEERING COLUMN COVER
3. REMOVE TURN SIGNAL SWITCH ASSEMBLY
a) Remove the 3 screws and turn signal switch assembly.
4. REMOVE TILT & TELESCOPIC MANUAL SWITCH
a) Disconnect the turn signal switch connector from the turn signal switch.
b) Pull out the harness VC and MSW from the connector.
c) Remove the screw and tilt & telescopic manual switch.
5. INSTALL TILT & TELESCOPIC MANUAL SWITCH
a) Install the harness VC and MSV to the connector.
b) Connect the connector to the switch assembly.
c) Install the tilt & telescopic manual switch assembly with the screw.
6. INSTALL TURN SIGNAL SWITCH ASSEMBLY
a) Install the turn signal switch assembly with the 3 screws.
7. INSTALL STEERING COLUMN COVER
8. INSTALL COVER, STEERING COLUMN, LWR