Front

ACCELERATION SENSOR
REPLACEMENT
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE COWL SIDE TRIM BOARD RH
3. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1
4. REMOVE INSTRUMENT PANEL FINISH PLATE
5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH
6. REMOVE INSTRUMENT PANEL LOWER LH





7. REMOVE ACCELERATION SENSOR
a. Disconnect the connector from the acceleration sensor.
b. Remove a bolt and the acceleration sensor.
8. INSTALL ACCELERATION SENSOR
a. Install the acceleration sensor with a bolt.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Connect the connector to the acceleration sensor.
9. INSTALL INSTRUMENT PANEL LOWER LH
10. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL RH
11. INSTALL INSTRUMENT PANEL FINISH PLATE
12. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1
13. INSTALL COWL SIDE TRIM BOARD RH
14. INSTALL FRONT DOOR SCUFF PLATE RH