Rear

ACCELERATION SENSOR ASSEMBLY
REPLACEMENT
1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
2. REMOVE QUARTER SCUFF PLATE INSIDE LH
3. REMOVE REAR DOOR SCUFF PLATE LH
4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
5. REMOVE BACK DOOR WEATHERSTRIP
6. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR
7. REMOVE QUARTER INSIDE TRIM BOARD LH





8. REMOVE ACCELERATION SENSOR ASSEMBLY
a. Disconnect the connector.
b. Remove a clip, bolt and the acceleration sensor assembly.
9. INSTALL ACCELERATION SENSOR ASSEMBLY
a. Install the acceleration sensor assembly with a clip and a bolt.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Connect the connector.
10. INSTALL REAR NO. 2 SEAT ASSEMBLY LH