Operation CHARM: Car repair manuals for everyone.

System Description

Indicator lamp




During vehicle stabilizer control operation, the KDSS indicator lamp comes on when there is any malfunction in the KDSS.

NOTE:
- When the malfunction has been corrected, the KDSS indicator lamp goes off.
- There are some malfunctions which do not cause the KDSS indicator lamp to come on (see Diagnostic Trouble Code Chart for the items that cause the KDSS indicator lamp to come on).

DTCs (Normal mode)

DTCs are memorized in the stabilizer control ECU and read by counting the number of blinks of the KDSS indicator lamp or using the hand-held tester (see DTC Check/Clear for the procedure of DTC check).

Test mode

By switching from normal mode to test mode, the stop lamp switch and front wheel speed sensors can be inspected).