Without Scan Tool

Check DTCs.




1. Using SST, connect terminals TC and CG of the DLC3.
SST 09843-18040

2. Turn the ignition switch to the ON position.







3. Read and record any DTCs from the KDSS indicator lamp on the combination meter. As examples, refer to the illustration on the left for the blinking patterns of the normal system code and trouble codes 13 and 33.

HINT:
- If the KDSS indicator lamp does not indicate any DTC or the normal system code, inspect the KDSS indicator lamp circuit or TC terminal circuit.

Trouble Area
KDSS indicator lamp circuit
TC terminal circuit

- If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.

4. Refer to the Diagnostic Trouble Code Chart for DTC information.
5. After completing the check, remove the SST from the DLC3.
SST 09843-18040