Park/Neutral Position Switch Circuit
PARK/NEUTRAL POSITION SWITCH CIRCUITCIRCUIT DESCRIPTION
This circuit sends a signal of the Park/Neutral Position switch (Neutral or other) to the Windshield Wiper ECU, and the Park/Neutral Position switch (Park or other) to the Multiplex Network Body ECU.
HINT: Refer to the Automatic Transmission section for the PNP switch check.
Wiring Diagram:
Wiring Diagram:
Step 1:
Step 2:
INSPECTION PROCEDURE
HINT: Start the inspection from step 1 in the case of using the hand-held tester, and start from step 2 in the case of not using the hand-held tester.