Operation CHARM: Car repair manuals for everyone.

Problem Symptom Confirmation (Road Test)

PROBLEM SYMPTOM CONFIRMATION (ROAD TEST)

a. Inspect the SET switch.




1. Push the main switch ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. Press the control switch to the -/SET.
4. After releasing the switch, check that the vehicle cruises at the desired speed.

b. Inspect the '+' switch.




1. Push the main switch button to ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. Check that the vehicle speed increases while the control switch is pulled up to +/RES, and that the vehicle cruises at the set speed when the switch is released.
4. Momentarily pull up the control switch upward to the +/RES and then immediately release it. Check that the vehicle speed increases by about 1.5 km/h (Tap-up function).

c. Inspect the '-' switch.




1. Push the main switch button to ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. Check that the vehicle speed decreases while the control switch is push down to -/SET, and the vehicle cruises at the set speed when the switch is released.
4. Momentarily push the control switch downward to -/ SET, and then immediately release it. Check that the vehicle speed decreases by about 1.5 km/h (Tap-down function).

d. Inspect the CANCEL switch.




1. Push the main button to ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal
- Shift to any positions except D position
- Push the main switch button to OFF
- Pull the cruise control switch to CANCEL

e. Inspect the RES (RESUME) switch.




1. Push the main switch button to ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal
- Shift to any positions except D position
- Press the main switch button to OFF

4. After the control switch is pulled up to +/RES at the driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.