With Manufacturer's Scan Tool

DTC CLEARANCE (Using LEXUS hand-held tester)




a. Hook up the LEXUS hand-held tester to the DLC3.
b. Clear the DTCs by following the prompts on the tester screen.

HINT: Please refer to the LEXUS hand-held tester operation's manual for further details.

DTC CLEARANCE (Not using service wire)

When the ignition switch is turned OFF, the diagnostic trouble code is cleared.

HINT: Depending on the DTC, the code might not be cleared by turning the ignition switch OFF.

In this case, proceed to the next step.