Without Scan Tool

DTC CHECK (USING SST CHECK WIRE)




Checking DTCs using a SST check wire.

SST 09843-18040

1. Using the SST, connect terminals Tc and CG of DLC3.
2. Turn the ignition switch ON.




3. Read and record any DTCs from the VGRS warning light on the combination meter. Refer to the chart for examples of a normal code and codes 11 and 21.

HINT: If the VGRS warning light does not blink any DTC codes or the normal code, inspect the warning light circuit.

Trouble Area
Tc and CG terminal circuit
VGRS warning light circuit

4. Refer to the Diagnostic Trouble Code Chart for DTC information.