LEXUS Night View System

INSPECTION MODE

The inspection mode is used to check the night view projectors when the vehicle is not moving or the surroundings are bright (daytime).
This mode will automatically turn OFF after 5 minutes.




a. Inspection Mode Procedure:
1. Ignition switch and headlight OFF.
2. Headlight dimmer switch ON.
3. While pressing the night view switch, turn the ignition switch from OFF->ON->OFF->ON.
4. Release the switch. The MAIN indicator should be ON.
5. Press the switch again. The BEAM indicator light should come on.
6. The night view projectors should be ON.
7. Display cover should open.
8. The display should come on approximately 1 second after the display cover opens and an image is displayed.

b. Pressing the night view switch while in inspection mode will turn the BEAM light OFF, turn the projectors OFF, and close the display cover.
Also, turning the headlight dimmer switch OFF will turn the BEAM light OFF and close the display cover.
c. Turn the ignition switch OFF in order to exit inspection mode operation.