Display Check Mode

DISPLAY CHECK MODE (TOUCH SWITCH CHECK)

HINT:
- This mode checks the touch switch operation condition on the multi-display.
- Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.




a. Select "Display Check" from the "Diagnosis MENU" screen.




b. Select "Touch Switch Check" from the "Display Check" screen.




c. Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.

HINT:
- A "+" mark is displayed where the display is touched.
- The "+" mark remains on the display even after the finger is removed.

DISPLAY CHECK MODE (PANEL SWITCH CHECK)

HINT:
- This mode checks the panel switch operation response on the multi-display.
- Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.




a. Select "Display Check" from the "Diagnosis MENU" screen.




b. Select "Panel Switch Check" from the "Display Check" screen.







c. Operate each switch and check that the switch name and condition are correctly displayed.

HINT: Pressing the "DISPLAY" switch for 3 seconds will exit the diagnostic mode.

DISPLAY CHECK MODE (VEHICLE SIGNAL CHECK)

HINT:
- This mode checks the vehicle signal status input to the multi-display.
- Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.




a. Select "Display Check" from the "Diagnosis MENU" screen.




b. Select "Vehicle Signal Check" from the "Display Check" screen.




c. When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.