Front Seat

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE SEAT TRACK OUTER COVER
a. Using a screwdriver, detach the claws and remove the 4 covers.

HINT: Tape the screwdriver tip before use.

2. REMOVE FRONT SEAT ASSEMBLY
a. Remove the 4 bolts.

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)

b. Disconnect the cable from the negative (-) battery terminal.

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

c. Disconnect the connectors and remove the seat.

NOTE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
- Be careful not to damage the vehicle body.

INSTALLATION
The installation procedures are the removal procedures in reverse order.