Rear No. 1 Seat (RH)

REMOVAL

1. REMOVE REAR NO. 1 SEAT ASSEMBLY
a. Fold the seatback down.
b. Unlock the seat lock, and swing the whole seat up and forward.
c. Using a screwdriver, remove the seat leg covers.

HINT: Tape the screwdriver tip before use.

d. Remove the 4 bolts and rear No. 1 seat.

Torque: 41 N.m (420 kgf.cm, 30 ft.lbf)

INSTALLATION
The installation procedures are the removal procedures in reverse order.