SRS Warning Light Check

SRS WARNING LIGHT CHECK




a. Turn the ignition switch ON, and check that the SRS warning light comes on for approximately 6 seconds (primary check).
b. Check that the SRS warning light goes off approximately 6 seconds after the ignition switch is turned ON (constant check).

HINT: When any of the following symptoms occur, refer to the "Problem Symptoms Table".

- The SRS warning light comes on occasionally after the primary check period has elapsed.
- The SRS warning light comes on, but a DTC is not output.
- The ignition switch is turned from OFF to ON, but the SRS warning light does not come on.