Room Temperature Sensor(For Front Air Conditioning System)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

HINT: At the time of installation, perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

2. REMOVE NO. 1 FINISH PANEL LOWER
3. REMOVE ROOM TEMPERATURE SENSOR
a. Disconnect the connector and aspirator hose.




b. Remove the screw and sensor.

INSTALLATION
Installation is in the reverse order of removal.