Headlamp Dimmer Switch: Service and Repair

Headlight Dimmer Switch:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STEERING WHEEL ASSEMBLY
3. REMOVE HEAD LIGHT DIMMER SWITCH ASSEMBLY
4. REMOVE WIPER AND WASHER SWITCH ASSEMBLY
5. REMOVE STEERING ANGLE SENSOR
6. REMOVE TILT AND TELESCOPIC SWITCH
7. REMOVE SWITCH BODY
8. REMOVE SPIRAL CABLE SUB-ASSEMBLY
9. REMOVE CANCEL CAM




a. Turn the cancel cam while pressing it, and pull it out.

INSTALLATION

HINT: Installation is in the reverse order of removal.

1. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
2. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.