Ride Height Sensor: Testing and Inspection

INSPECTION


1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB ASSEMBLY




a. Disconnect the height control sensor connector.
b. Remove the height control sensor.
c. Connect 3 dry batteries of 1.5 V in series.
d. Connect terminal 2 to the batteries' positive terminal, and terminal 3 to the batteries' negative terminal, then apply voltage about 4.5 V between terminals 2 and 3.

Standard Voltage:

e. Measure the voltage between terminals 1 and 3, when the height control sensor link is slowly moved up and down.


2. INSPECT REAR HEIGHT CONTROL SENSOR SUB ASSEMBLY




a. Disconnect the height control sensor connector.
b. Remove the height control sensor.
c. Connect 3 dry batteries of 1.5 V in series.
d. Connect terminal 1 to the batteries' positive terminal, and terminal 3 to the batteries' negative terminal, then apply voltage about 4.5 V between terminals 2 and 3.

Standard Voltage:

e. Measure the voltage between terminals 2 and 3, when the height control sensor link is slowly moved up and down.