Height Control Sensor
INSPECTION1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB ASSEMBLY
a. Disconnect the height control sensor connector.
b. Remove the height control sensor.
c. Connect 3 dry batteries of 1.5 V in series.
d. Connect terminal 2 to the batteries' positive terminal, and terminal 3 to the batteries' negative terminal, then apply voltage about 4.5 V between terminals 2 and 3.
e. Measure the voltage between terminals 1 and 3, when the height control sensor link is slowly moved up and down.
Standard Voltage:
2. INSPECT REAR HEIGHT CONTROL SENSOR SUB ASSEMBLY
a. Disconnect the height control sensor connector.
b. Remove the height control sensor.
c. Connect 3 dry batteries of 1.5 V in series.
d. Connect terminal 1 to the batteries' positive terminal, and terminal 3 to the batteries' negative terminal, then apply voltage about 4.5 V between terminals 2 and 3.
e. Measure the voltage between terminals 2 and 3, when the height control sensor link is slowly moved up and down.