Removal and Replacement
REMOVAL1. REMOVE FRONT BUMPER STAY CENTER
a. Remove the 5 clips and front bumper stay center.
2. REMOVE FRONT BUMPER ASSEMBLY
a. Using a hexagon 4 mm wrench, remove the hexagon screw.
b. Put protective tape under the front fender.
c. Remove the 6 screws and 2 bolts.
d. Release the 6 claws and front bumper assembly.
e. w/ headlight washer:
1. Remove the washer hose clip.
f. Disconnect the fog light connectors.
INSTALLATION
1. INSTALL FRONT BUMPER ASSEMBLY
2. INSTALL FRONT BUMPER STAY CENTER
3. VEHICLE PREPARATION FOR FOG LIGHT AIM
4. PREPARATION FOR FOG LIGHT AIMING
5. FOG LIGHT AIMING INSPECTION
6. FOG LIGHT AIMING ADJUSTMENT