Component Tests and General Diagnostics

INSPECTION

1. INSPECT FUEL LID W/MOTOR LOCK ASSEMBLY







a. Apply battery voltage to the lock control and check the motor operates in the direction.

b. Check the shaft stroke.

Standard: 10.3 mm (0.406 in.) or more

2. INSPECT FUEL FILLER OPENING LID LOCK SUBASSEMBLY







a. Check the fuel filler opening lid lock sub-assembly resistance.

If the result is not as specified, replace the fuel filler opening lid lock sub-assembly.

3. INSPECT FUEL FILLER DOOR OPENER SWITCH







a. Check the fuel filler door opener switch resistance.

If the result is not as specified, replace the fuel filler door opener switch.