Trunk / Liftgate: Adjustments
ADJUSTMENT1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. INSPECT BACK DOOR
a. Check that the clearance is within the standard range.
3. ADJUST BACK DOOR
a. Loosen the body side hinge nuts and adjust the door right, left, forward, and rearward.
Torque: 11.5 N.m (117 kgf.cm, 8.0 ft.lbf)
b. Horizontally and vertically adjust the back door by loosening the back door side hinge bolts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
c. When adjusting the back door rear side to side and the back door lock striker assembly, loosen the bolts until the striker can move. Lightly tap striker with a brass bar for adjustment.
Torque: 23 N.m (235 kgf.cm, 17 ft.lbf)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION