Key Reminder Warning System
TERMINALS OF ECU1. CHECK INSTRUMENT PANEL J/B ASSEMBLY (BODY ECU)
a. Disconnect the B4 and B6 ECU connectors.
b. Disconnect the 1D, 1F and 1M J/B connectors.
c. Measure the voltage and resistance according to the value(s) in the table.
HINT: If the result is not as specified, there may be a malfunction on the wire harness side.
d. Reconnect the 1D, 1F, 1M, B4 and B6 connectors.
e. Measure the voltage according to the value(s) in the table.