Battery Cooling Fan: Service and Repair
REMOVAL1. OBSERVE PRECAUTIONS FOR HIGH-VOLTAGE CIRCUIT INSPECTION AND SERVICE
2. READ OUTPUT DTC
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. REMOVE SERVICE PLUG GRIP
5. REMOVE REAR SEAT TRACK BRACKET COVER
6. REMOVE REAR SEAT ASSEMBLY LH
7. REMOVE REAR SEAT TRACK BRACKET COVER
8. REMOVE REAR SEAT ASSEMBLY RH
9. REMOVE AIR INTAKE COVER
10. REMOVE AIR INTAKE COVER CENTER
11. SEPARATE FLOOR CARPET ASSEMBLY FRONT
12. REMOVE REAR CENTER SEAT INNER BELT
13. REMOVE BATTERY CARRIER BRACKET
14. REMOVE BATTERY CARRIER DUCT
15. REMOVE HV BATTERY SERVICE HOLE COVER
16. REMOVE BATTERY COVER SUB-ASSEMBLY
17. REMOVE BATTERY COOLING BLOWER ASSEMBLY
NOTE: Wear insulating gloves and protective glasses.
a. Disconnect each battery cooling blower assembly connector and clamp.
b. Remove the 9 nuts and 3 battery cooling blower assemblies.
INSTALLATION
1. INSTALL BATTERY COOLING BLOWER ASSEMBLY
NOTE: Wear insulating gloves and protective glasses.
a. Install the 3 battery cooling blower assemblies with the 9 nuts.
Torque: 4.5 N.m (46 kgf.cm, 40 in.lbf)
b. Connect each battery cooling blower assembly connector and clamp.
2. INSTALL BATTERY COVER SUB-ASSEMBLY
3. INSTALL BATTERY CARRIER DUCT
4. INSTALL BATTERY CARRIER BRACKET
5. INSTALL REAR CENTER SEAT INNER BELT
6. INSTALL FLOOR CARPET ASSEMBLY FRONT
7. INSTALL AIR INTAKE COVER CENTER
8. INSTALL AIR INTAKE COVER
9. INSTALL REAR SEAT ASSEMBLY LH
10. INSTALL REAR SEAT TRACK BRACKET COVER
11. INSTALL REAR SEAT ASSEMBLY RH
12. INSTALL REAR SEAT TRACK BRACKET COVER
13. INSPECT SLIDE ADJUSTER LOCK SIMULTANEOUSLY
14. INSTALL SERVICE PLUG GRIP
15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
16. PERFORM INITIALIZATION
Some systems need initialization when reconnecting the battery cable.