Headlamp Dimmer Switch: Service and Repair
REMOVAL1. PRECAUTION, refer to Restraint System Service Precautions.
2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. REMOVE STEERING WHEEL COVER LOWER NO.2
5. REMOVE STEERING WHEEL COVER LOWER NO.3
6. REMOVE STEERING PAD
7. REMOVE STEERING WHEEL ASSEMBLY (for Manual Tilt)
8. REMOVE STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic)
9. REMOVE STEERING COLUMN COVER (for Manual Tilt)
10. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic)
11. REMOVE SPIRAL CABLE
12. REMOVE WIPER SWITCH
13. REMOVE HEADLIGHT DIMMER SWITCH
a. Disconnect the connector.
b. Disengage the claw as shown in the illustration.
c. Remove the headlight dimmer switch as shown in the illustration.
INSTALLATION
1. INSTALL HEADLIGHT DIMMER SWITCH
a. Install the headlight dimmer switch as shown in the illustration.
b. Install the headlight dimmer switch with the claw and the clamp.
c. Connect the connector.
2. INSTALL WIPER SWITCH
3. INSTALL SPIRAL CABLE
4. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)
5. INSTALL STEERING COLUMN COVER (for Manual Tilt)
6. ADJUST SPIRAL CABLE
7. INSTALL STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic)
8. INSTALL STEERING WHEEL ASSEMBLY (for Manual Tilt)
9. INSPECT STEERING WHEEL CENTER POINT
10. INSTALL STEERING PAD
11. INSTALL STEERING WHEEL NO.2 COVER LOWER
12. INSTALL STEERING WHEEL NO.3 COVER LOWER
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSPECT STEERING PAD
15. PERFORM INITIALIZATION
16. INSPECT SUPPLEMENTAL RESTRAINT SYSTEM WARNING LIGHT