Power Point Socket (Rear)
REMOVAL1. REMOVE REAR DOOR SCUFF PLATE LH
2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
3. REMOVE DECK BOARD SUB-ASSEMBLY
4. REMOVE TONNEAU COVER ASSEMBLY
5. REMOVE JACK CARRIER SUPPORT
6. REMOVE JACK ASSEMBLY
7. REMOVE JACK CARRIER ASSEMBLY
8. REMOVE DECK FLOOR BOX FRONT
9.REMOVE DECK FLOOR BOX REAR
10. REMOVE NO.2 DECK BOARD SUB-ASSEMBLY
11. REMOVE NO.3 DECK BOARD SUB-ASSEMBLY
12. REMOVE BACK DOOR WEATHERSTRIP
13. REMOVE DECK SIDE TRIM BOX LH
14. REMOVE DECK SIDE TRIM BOX RH
15. REMOVE REAR FLOOR FINISH PLATE
16. REMOVE REAR FLOOR FINISH SIDE PLATE LH
17. REMOVE DECK SIDE TRIM COVER LH
18. SEPARATE REAR NO.1 SEAT OUTER BELT ASSEMBLY LH
19. REMOVE REAR SEAT SIDE COVER LH
20. REMOVE ROPE HOOK
21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
22. REMOVE NO.2 ROOM LIGHT ASSEMBLY
23. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH
24. REMOVE REAR POWER POINT SOCKET
a. Turn the rear power point socket in counterclockwise as shown in the illustration and disengage the claw between the rear power point socket and the power point socket cover.
b. Push out the rear power point socket.
c. Align the rear power point socket with the notch on the power point socket cover, and remove the rear power point socket.
25. REMOVE POWER OUTLET SOCKET COVER REAR
a. Disengage the 2 claws, and remove the power outlet socket cover rear.
INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER REAR
a. Engage the 2 claws and install the power outlet socket cover rear.
2. INSTALL REAR POWER POINT SOCKET
a. Place the rear power point socket with the notch on the power point socket cover, and push in the rear power point socket as hard as possible to install it.
3. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH
4. INSTALL NO.1 TONNEAU COVER HOLDER CAP
5. INSTALL NO.2 ROOM LIGHT ASSEMBLY
6. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
7. INSTALL ROPE HOOK
8. INSTALL REAR SEAT SIDE COVER LH
9. INSTALL REAR NO.1 SEAT OUTER BELT ASSEMBLY LH
10. INSTALL DECK SIDE TRIM COVER LH
11. INSTALL REAR FLOOR FINISH SIDE PLATE LH
12. INSTALL REAR FLOOR FINISH PLATE
13. INSTALL DECK SIDE TRIM BOX LH
14. INSTALL DECK SIDE TRIM BOX RH
15. INSTALL BACK DOOR WEATHERSTRIP
16. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY
17. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY
18. INSTALL DECK FLOOR BOX REAR
19. INSTALL DECK FLOOR BOX FRONT
20. INSTALL JACK CARRIER ASSEMBLY
21. INSTALL JACK ASSEMBLY
22. INSTALL JACK CARRIER SUPPORT
23. INSTALL TONNEAU COVER ASSEMBLY
24. INSTALL DECK BOARD SUB-ASSEMBLY
25. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
26. INSTALL REAR DOOR SCUFF PLATE LH