Removal and Replacement
REMOVAL1. REMOVE DECK FLOOR BOX REAR
2. REMOVE BACK DOOR WEATHERSTRIP
3. REMOVE REAR FLOOR FINISH PLATE
4. REMOVE REAR BUMPER STOPPER UPPER
a. Remove the 2 screws.
b. Using a screwdriver, remove the rear bumper stopper upper.
5. REMOVE REAR BUMPER ASSEMBLY
a. Put protective tape under the quarter panel.
b. Remove the 2 clips and 4 nuts.
c. Remove the 8 screws.
d. Release the 10 claws and the rear bumper assembly.
e. Disconnect the rear reflector connectors.
INSTALLATION
1. INSTALL REAR BUMPER ASSEMBLY
a. Install the rear reflector connectors.
b. Engage the 10 claws and install the rear bumper assembly.
c. Install the 8 screws and 2 clips.
d. Install the 4 nuts.
Torque: 8.0 N.m (81 kgf.cm, 71 in.lbf)
2. INSTALL REAR BUMPER STOPPER UPPER
3. INSTALL REAR FLOOR FINISH PLATE
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL DECK FLOOR BOX REAR